GOLDSANGPRO Δ Series Active Line Array system

GOLDSANGPRO Δ Series Active Line Array system

FROM:BIEMA AUDIO | TIME:2011-1-16 14:45:15 | visits：4140098

GOLDSANGPRO Δ Series Active Line Array system Introduction Goldsangpro Δ series active line array system is composed of an active subwoofer and passive mid & high line array speakers. The speakers can be either hoisted or ground stacked as a line array. The system has the advantage of easy and flexible installation because of small cabinets. There are two models of Δseries line array system: Δ-a &Δ-b. Δ-b is the subwoofer comprising 2 pieces of 8" LF loudspeakers while Δ-a is the mid & high speaker comprising 2 pieces of 4" MF loudspeakers and 1 piece of pro-ribbon HF driver. Biema engineers made a grate effort in creating the new technology for accomplishing the system. Δ series is not just a simple active speaker system. It possesses distant PC control for the line array speakers, phrase, delay, EQ, crossover, level control functions, etc. One piece of Δ-b can drive four pieces of Δ-a. It satisfies the basic application of a line array. Goldsangpro Δ series active line array is specially designed for vocal reinforcement. It is best for small-to-medium conference room, KTV and pint-sized performance venues. Δ -b Active Line Array System: ★Biema proprietary aluminium rigging hardware and suspension frame ★High-density noise absorbable materials ★Quick and easy rigging ★Proprietary Plane coverage dispersion technoloy ★Specialized flight cases for transportation protection ★Professional power supply and connection ★Environmental black lacquer coating ★Special-designed round perforation steel grille ★7-ply birch laminate construction ★HI-FI tone Pro-ribbon tweeter ΔII-bSERIES ACTIVE LINE ARRAY BACK PANE： 1. XLR signal input      Can accept balance or unbalance signal:      Pin1: Ground, Pin2: Positive(+), Pin3: Negative(-) 2. XLR signal output      Can be connected to the signal input of another speaker :      Pin1: Ground, Pin2: Positive(+), Pin3: Negative(-) 3.     RS485 Control (with PC software )   4. Power on LED (Blue)      This blue LED illuminates as an indication that the amplifier      is powered up. 5.     Protection LED (Yellow)      The LED will be lighted when there is a shortcut in the speaker      or when the amplifier is overloaded. 6. SIG /CLIP HF: HF signal indicator (green), clip indicator (red). 7. SIG /CLIP SUB: LF signal indicator (green), clip indicator (red). 8. High pass level knob      This knob is used for adjusting the volume. For louder      sound, please turn it clockwise. For lower sound, please      turn it anti-clockwise. 9. Low pass level knob      This knob is used for adjusting the volume. For louder sound,      please turn it clockwise. For lower sound, please turn it anti-clockwise.   10.Voltage selector      AC115V or AC230V can be selected by using this switch.      Please select your local electricity power supply voltage before      connection. 11.Fuse jack (with fuse)      The voltage selected is 115V, T12A/250V fuse should be used.      If the voltage selected is 230V,T6A/250V fuse should be used.      Please check whether the fuse can match with local electricity      power supply voltage before connection.. 12.Power switch      On/off power switch for the amplifier. When it is set to ON, the      amplifier is powered up. When it is set to OFF, the amplifier is      powered off. 13.Power output jack      This jack is used for linking another cells. The caution for using      this jack is the same as above. 14.Power input jack      115V/60Hz or 230V/50Hz can be selected for power input.      Please mind that different fuses should be used for different      voltages. Check whether the fuse can match with local      electricity supply voltage before power on the unit. 15.Cooling fans      The fan ventilation holes can not be blocked on any occasions. 16.HF amplifier output:      Output speaker to satellite. 17.Ventilation gaps      The ventilation gaps can not be blocked on any occasions.  Δ-b Series active line array configuration： Δ-b Drawing for frequency response and impedance:  Δ-b Series active line array system 　Δ-b　SPECIFICATION: 　System 　Active subwoofer 　Configuration 　Construction 　LF unit 　2 pieces 8" (φ50mm) mid 　Material 　Polo birch plywood 　Exterior protection 　Environmental black lacquer finishing 　Suspension 　Proprietary Biema rigging system 　Front panel protection 　Harden spray finishing round perforation steel grille   　Height Front 264mm 　Product Dimensions 　Width 458.5mm 　　Depth 537mm 　Shipping Dimensions 　600x650x660mm(WxDxH) 　Weight 　N.W 24kg 　G.W 52.3kg(1xΔ－b and 4xΔ－a) 　Frequency response ( ±3 dB) 　1 enclosure 60Hz-250KHz 　Sensitivity(Axis1m/1w) 　Full range 97dB 　Input impedance 　4 ohm 　Continuous Power 　300W 　Max. power 　600W 　Amplifier power 　400W(High)+400(Low) 　nput sensitivity 　0.775V 　Connectors 　1x XLR through out 1x XLR   　Input 2x1/4" TRS input   　Horizontal 100°(50m) 　Dispersion angle 　Vertical 60° (50m)

TAG：Δ-b

Print || Close

PREV：Finish!  NEXT：Finish