Products – PA
|  |
Power Amplifier – STX200
The SoundTech STX200 is a 200 watt passive power amplifier whose convection cooling and speaker surge protection make it ideal for studio use! The SoundTech STX200 is a 200-watt high performance power amplifier whose sophisticated cooling and surge protection systems offer complete protection against DC faults, short circuits and thermal overheating. Complete protection for both the STX200 and any speakers to which it is connected, in addition to low weight (19 lbs.) and quiet fan operation, make this unit a Passive Power Amp, perfect for monitor and studio use. The STX200 also features versatile inputs that allow connection via balanced XLR connectors or unbalanced 1/4-inch phone jacks. The outputs are banana type, providing reliable connection to all kinds of equipment.
Specifications
- Specifications:
- Input Impedance: Unbalanced - 10K Ohms Balanced - 600 Ohms
- Input Sensitivity: Unbalanced -10dB Balanced +4dB (1.23V)
- Connectors: Unbalanced - 1/4" Phone Jack X 2 Balanced - XLR X 2
- 8 Ohms Stereo Mode: 55W + 55W
- 4 Ohms Stereo Mode: 100W + 100W
- 8 Ohms Bridged Mode: 200W
- Frequency Response: 15 Hz - 30 KHz
- Total Harmonic Distortion: 0.05%
- Channel Separation: 84 dB
- Damping Factor at 8 Ohms: 300:1
- Slew Rate: 48 V/u Sec
- Voltage Gain: 30 dB
- Signal to Noise Ratio: 90 dB
- Hum and Noise: -83 dB
- Indicators: 1 Power LED. 1 Mono/Bridge LED. 1 Protect LED. 2 Clip LED.
- Cooling Convection
- Protection: Short Circuit Current Limited, DC Fault Protection, Power Up/Down Transients, Fused Outputs & AC Line Fuse
- Speaker Output Connectors: 5-Way Binding Posts
- Power Requirements: 120 VAC 60 Hz
- Weight: 17 Lbs
- Fuse Rating: 4A/250V
- Dimensions: 19" X 8.5" X 1.75"
*Specifications and pricing subject to change without notice
