AVANTI-C6 28SPECIFICATION

The Avanti C6 28 is a floor standing three way bass reflex system housed in a balanced luxury veneered enclosure. The drive unit complimentation consists of a unique 25mm carbon fibre high frequency unit, with a new Rogers 165mm mid-range unit and a new Rogers 210mm woofer.The carbon fibre tweeter combines the pistonic performance of a metal dome but exhibiting a distortion characteristic closer to a soft dome. The high frequency performance has excellent attack with an open and natural decay. The 165mm mid-range unit is built on a new Rogers die cast chassis and utilises an injected moulded polypropylene cone for improved mid-band performance. The 210mm woofer is built on a new Rogers die cast chassis with a substantial low distortion magnet system giving optimal damping and accurate bass performance. The Rogers crossover is essentially second order low pass, third order high pass, and is hard wired directly to both the input terminals and drive units. The crossover is bi-wireable to ensure maximum performance. Particular attention has been paid to component type and position to ensure an even tonal and dispersion performance. System Type: Three way reflex. Frequency Response: 45Hz-20Khz +/- 3dB. Bass/Midrange: Rogers die cast chassis. 205mm injection moulded cone. Low distortion high flux magnet system. Crossover: - Tweeter: 25mm Carbon fibre dome. Sensitivity: 88dB for 1W @ 1m. Nominal Impedance: 6 Ohms. Power Handling 125 watts. Recommended Amplifier Range: 40-150 Watts Maximum SPL: 107dB @ 2m per pair. Distortion @ 90dB SPL: Second and third harmonic less than 2% 45Hz-20kHz. Cabinet: High density particle board with M.D.F. baffle. Connections: 4 x 4 Rogers gold plated terminals. Weight: 22Kg each. Placement Recommended: 300mm from rear wall. Angled in so axes cross in front of listener.   * Design and specifications are subject to change without notice.

Last Update : 27 June 2011  Disclaimer Copyright (c) 2001-2004 Rogers International Ltd. All Rights Reserved.