AVM 1 | - Class-D amplifier module for installation inside the VIBE-10 Mk2 & VIBE-12 Mk2 speakers
- All you need is a screwdriver and 5 minutes of your time to make the transformation, no technical skills required!
- Balanced / unbalanced line input/output (XLR) with volume control.
- 100Hz low-cut filter, used to cut low frequencies to the speaker cabinet when used in combination with an active subwoofer.
- Speakon output for optional passive 8ohm cabinet. (preferable same model)
- IEC input mains connector with integrated switch
Power 8ohm (1kHz, THD+N <0,1%): 300Wrms
Power 4ohm (1kHz, THD+N <0,1%): 500Wrms
Freq. Resp. (+/-2dB): 20 – 20.000Hz
Input Sensitivity line: 1V
Input impedance: 20 kohm
S/R ratio (A-weighted): >86dB
Damping factor: 320
Cooling: Magnetic field fan
Line input / output: Balanced XLR 3pin
Outputs: Speakon +1/-1
Protections: Thermal, Limiter, Current limiter, short circuit, DC-protection
Fuse (5x20mm): T5AL / 250V
Power supply: AC230V / 50Hz
Power consumption (peak/4ohm ): 630W
Dimensions (mm): 275x145x72mm
Hole cutout (mm): 253x123mm
Weight (without mains cable): 2kg
|
AVM 2 | - Class-D amplifier module for installation inside the VIBE-15Mk2, Vibe 30Mk2 and Vibe 15s Mk2 speakers
- All you need is a screwdriver and 5 minutes of your time to make the transformation, no technical skills required!
- Balanced / unbalanced line input/output (XLR) with volume control.
- Variable Lowpass filter (90-250Hz)
- Speakon output for optional passive 8ohm cabinet. (preferable same model)
- IEC input mains connector with integrated switch
Power 8ohm (1kHz, THD+N <0,1%): 500Wrms
Power 4ohm (1kHz, THD+N <0,1%): 850Wrms
Freq. Resp. (+/-2dB): 20 – 20.000Hz
Input Sensitivity line: 1V
Input impedance: 20 kohm
S/R ratio (A-weighted): >88dB
Damping factor: 350
Cooling: Magnetic field fan
Line input / output: Balanced XLR 3pin
Outputs: Speakon +1/-1
Protections: Thermal, Limiter, Current limiter, short circuit, DC-protection
Fuse (5x20mm): T5AL / 250V
Power supply: AC230V / 50Hz
Power consumption (peak/4ohm ): 1000W
Dimensions (mm): 320x160x78mm
Hole cutout (mm): 298x138mm
Weight (without mains cable): 3kg
|
AVM 3 | - Class-D amplifier module for installation inside the VIBE-18s Mk2 speaker
- All you need is a screwdriver and 5 minutes of your time to make the transformation, no technical skills required!
- Balanced / unbalanced line input/output (XLR) with volume control.
- Variable lowpass filter (90-250Hz)
- Speakon output for optional passive 8ohm cabinet. (preferable same model)
- IEC input mains connector with integrated switch
Power 8ohm (1kHz, THD+N <0,1%): 800Wrms
Power 4ohm (1kHz, THD+N <0,1%): 1300Wrms
Freq. Resp. (+/-2dB): 20 – 20.000Hz
Input Sensitivity line: 1V
Input impedance: 20 kohm
S/R ratio (A-weighted): >92dB
Damping factor: 350
Cooling: Magnetic field fan
Line input / output: Balanced XLR 3pin
Outputs: Speakon +1/-1
Protections: Thermal, Limiter, Current limiter, short circuit, DC-protection
Fuse (5x20mm): T5AL / 250V
Power supply: AC230V / 50Hz
Power consumption (peak/4ohm ): 1550W
Dimensions (mm): 320x160x78mm
Hole cutout (mm): 298x138mm
Weight (without mains cable): 3kg
|